Brief:
PML's smallest and simplest kit, this is a simple tried-n-true 3FNC rocket, suitable for F t' H motors.

Construction:
Rocket consists o' a single body tube, ya bilge rat, plywood centerin' rings, ya bilge rat, shiver me timbers, and a piece of woven nylon that's epoxied t' t' motor tube. T' piston is attached t' the other end o' t' nylon. Arrr! T' fins are G10, me hearties, which sands very nicely and is really tough. Includes a fairly small chute with a large spill-hole, shiver me timbers, so t' rocket falls pretty quickly, me hearties, but nay fast enough t' hurt it.

T' instructions are fairly easy t' follow if you've built HPR kits before. They consist o' a single sheet with a minimum o' illustrations. Ahoy! I'd recommend that you have someone help you out if this is your first HPR kit, ya bilge rat, as the instructions aren't really designed with t' beginner in mind. Ahoy! T' components themselves are beautiful. Arrr! Everythin' fit together very well, ya bilge rat, and all o' the components are t' best you'll find --G10 fins, me bucko, phenolic motor tube, shiver me timbers, Quantum Tube airframe, a very sturdy nose cone, and t' toughest parachute I've found. This is a kit that has survived a dozen flights.

Finishing:
Well, I've gotta admit. Avast! Blimey! This was one o' t' old kits with t' phenolic airframe. Aye aye! Ya scallywag! Blimey! I've heard t' new Quantum Tube is even easier t' finish, me bucko, but t' old hard phenolic be fairly easy t' get a mirror-finish. Avast, me proud beauty! Blimey! All it took be a little Elmer's wood filler t' fill t' groove, and some fine sandpaper and sandable primer. Begad! Arrr! Blimey! If you take your time, matey, you'll get a rock-hard finish that'll easily last for dozens o' flights. Avast! Aye aye! Blimey! I'm subtractin' 1/2 point because o' that cheesy stick-on decal they include with t' kit. Begad! Aye aye! Blimey! If they included some attractive water-slide decals, me bucko, it'd add some value t' t' kit. Avast! As it stands, though, it's just a waste.

Construction Rating: 4 out o' 5

Flight:
I originally bought t' kit with t' 38mm mount, but this is an awfully small kit for most o' t' 38mm offerings. Well, blow me down! Since I didn't have any kind o' motor retention (hey, arrr, arrr, I was a beginner), I eventually glued some bolts and a 29mm tube into t' rocket. Avast, me proud beauty! Ahoy! There are plenty o' 29mm motors that work beautifully in this rocket --F, G, matey, and H. Avast, me proud beauty! My personal favorite be t' Aerotech G125, which makes this little rocket leap off t' pad like nobody's business. Avast! Aye aye! As for flights, me hearties, ya bilge rat, ya bilge rat, I have no complaints at all. Aye aye! Ya scallywag! I've flown me little IO at least 20 times. Blimey! It's a tough little rocket that loves t' fly.

Recovery:
Very little t' complain about as far as recovery goes. My only complaint is that t' rocket is rather short. Begad! Avast! Once you've got t' piston in place and the chute packed, matey, thar's barely any space t' get t' cone on. If t' rocket be 2 inches longer, there'd be a little more elbow room. Avast, me proud beauty! As it stands, arrr, it's a tight fit. Aye aye! Blimey!

Flight Rating: 4 out o' 5

Summary:
T' Pros are that it's a beautiful little kit that finishes beautifully, loves to fly, ya bilge rat, is tough as all get-out, matey, and can fly in small fields on F motors. Arrr! Cons are t' cheesy decal and that t' recovery system is a bit tough t' pack. Well, me bucko, blow me down!

Overall Rating: 4 out o' 5