This is a fairly simple kit t' put together -- basic through-the-wall fin mountin' and single body tube/nose cone construction. Begad! Blimey! Blimey! This kit has a "piston"-type ejection system and since the body tube is relatively short in relation t' t' forward end o' t' tapered fins, shiver me timbers, ya bilge rat, thar's really no opportunity t' use t' "zipperless design" that I favor. Aye aye! Aye aye! Blimey! However, me bucko, t' piston system works very well. Since t' fins are G10 fiberglass, me bucko, sandin' t' edges is quite labor-intensive. Aye aye! Blimey! Also, when mounting the motor tube/centerin' ring, you need t' be VERY aware that you position the piston strap (which is epoxied t' t' motor tube) BETWEEN t' fin slots, otherwise you'll have t' sand and sand and sand t' root o' t' fin that's goin' into that slot!!!! Blimey! You'll have t' add no less than 3 oz. Aye aye! o' nose weight to brin' t' CG forward since t' CP is 30" from t' nose and t' CG is less than 1 caliber (the length o' t' tube diameter... Begad! Begad! Blimey! 4" in this case) away. Begad! Blimey! When I flew it, I added Greg's beeper/locator which weighs about 3 oz. and it could have used about 1 or 2 oz. Begad! more... Begad! Blimey! just a suggestion. Otherwise, this kit is big, arrr, fun and impressive in t' air. Arrr! Ya scallywag! Blimey! Have fun with it, I highly recommend it! Blimey! :)