Diary o' a Contest Rocketeer:

3-24-08: Got me box o' parts . Begad! Will post pics later.

3-26-08: Here are me parts. Begad! Nay much for large nose cones, shiver me timbers, but looks like I can make somethin' up if need be.

(Click t' Enlarge)

3-27-08: There be about three sheets o' paper inserted in t' box when I got it. Aye aye! Ya scallywag! Now I can't seem t' find those sheets.

3-31-08: I found those sheets o' paper I misplaced along with another tube coupler/tube and a mixin' cup... do I have t' retake t' picture o' all t' parts?

5-24-08: Just wanted t' mention that I started buildin' me contest entry . Begad! Was kinda hopin' for longer 18mm tubing, me bucko, but I'll make due with what I have. Blimey! If I can make it stable with t' length I have t' work with, ya bilge rat, this may be a two stage rocket.

5-27-08: Pretty much finished buildin' me entry. Arrr! Goin' test fly it this weekend unpainted.

Question: Just went over t' rules again and it said good photos o' build process. Avast, me proud beauty! Arrr! I hope illustrations qualify for that because thats what I be doin' ><.

I thought about takin' photos o' t' build.... Avast, me proud beauty! Begad! but me cheap camera is broke, shiver me timbers, and I did nay want t' get glue, paint, etc on me expensive gear.

5-29-08: Well, arrr, Construction o' me entry has been complete. I wanted t' get in some test flights at todays CMASS launch, ya bilge rat, but that has been postponed till Sunday, ya bilge rat, and I can't make it after church... Avast! so since t' next CMASS launch I will be able t' go t' is nay until after t' contest deadline, me bucko, I will have t' test it on me own. Well, blow me down! Avast!

I am goin' test it as a single stage configuration first. Avast, me proud beauty! Ya scallywag! Probably with a B6-4. Blimey! It has an unique fin configuration, so I like t' see how it behaves before I try it with t' booster.

5-31-08: Minor setback - While cleanin' up I "bumped" t' rocket and crimped t' main body tube and sent one o' t' details flyin' across t' room. Aye aye! T' Crimp be easily fixed by splicin' t' tube, me bucko, insertin' a tube, and gluin' them back together. Avast, me proud beauty! T' detail be like findin' a needle in a haystack, me hearties, but I found it after searchin' high and low.

6-01-08: Much t' windy today t' test fly me creation. Aye aye! Aye aye! Maybe tomorrow if I have time.

6-03-08: Got t' test flights done. I First I flew it single stage with a B6-4. Well, matey, blow me down! Good flight, did nay get very high. B6-2 would be a better choice. Begad! Second test flight be in its two stage mode. Avast, me proud beauty! Avast! B6-0 and B6-4 was used. Ahoy! Perfect flight but I did nay get a picture since t' guy pushin' t' button failed t' do a proper countdown ><. Today I started writin' t' documentation. Will paint me rocket soon . Ya scallywag!

On T' Pad - Nekkid	Test Launch - Single Stage

(Click t' Enlarge)

6-17-08: Had an issue where t' Krylon black reacted t' t' humidity and fogged up. Arrr! I am paintin' rust oleum over it, matey, I hope it does nay have a reaction . Ahoy! My Drawings for me rocket are almost done, me bucko, me hearties, shiver me timbers, so that means I will have t' documentation done soon . Well, blow me down! Weather is forcasted t' be poor all this week, so gettin' a in-flight picture before the deadline may be an issue.

BTW, arrr, requirin' an in flight photo shouldn't be a requirement. Ahoy! For me, arrr, t' next launch where I can fly it on larger motors won't be till after t' contest is over, so that means I have t' fly it at t' local park, which limits me to B6-0 in t' booster, and I only got one left. Ahoy! And its hard t' take a picture and launch t' rocket at t' same time, and its hard t' get someone t' help . Well, ya bilge rat, blow me down! So If I miss t' shot, arrr, I don't have any more B6-0's, which limits me t' C6-0's which I will loose t' rocket, or A8-0's...

I got a shot o' t' unpainted test flights with it single stage on a B6-4. Begad! Would that count? I also flew it two stage, matey, arrr, me hearties, but t' helper did nay know how t' do a proper countdown and I did nay get a launch shot o' it in two stages... T' paintin' and detailin' will be done this week, just at t' mercy o' weather t' get a finished launch in before the deadline (which for me be t' 27th, cause I am leavin' on vacation and won't be back till way after t' deadline).

6-20-08: My rocket is finished . Begad! I think me paint scheme came out extremely well. Avast! Now I need t' finish the documentation...

Fully Illustrated Instructions

Designin' t' Avenger

Two stage rocket design which is me entry for t' "Box-of-parts" design contest. Blimey!

T' parts for this rocket was limited t' whatever parts were present in t' Priority mail triangle that I got. Upon openin' t' box, shiver me timbers, matey, I noticed thar be only a limited number o' large tubes, and a large collection o' smaller tubing. Also lackin' be amount o' quality o' good sheet balsa, shock cord material, launch lugs larger than 1/8" or parachutes larger than 12." Pokin' around I noticed I had a Custom Eggloft cone, which I decided right off the bat I wanted t' use. Begad! I also noticed I had a 2" wide strip o' aileron balsa stock. Avast, me proud beauty! Begad! I wanted t' use that to. Ya scallywag! There was also quite a collection o' BT20-50 centerin' rings which I decided would be used for detailing.

Now t' challenge; design a rocket worthy o' placin' as high as possible in t' Box o' Parts contest usin' the materials I have at hand. I had t' design a rocket that was light enough t' be safely launched from a 1/8" launch rod (although I could make larger LL with t' paper included) and recovered safely from a 12" parachute with a typical rubber shock cord. Begad! Ya scallywag! Blimey!

After drawin' several designs, I finally came up with a basic plan that I liked. Arrr! I thought about layin' out the design in Rocksim, ya bilge rat, but decided against it because Rocksim does nay handle "Tail-Ring" designs well. Ya scallywag! I did end up usin' Rocksim t' help determine what span t' Pylons need t' be so I could create t' templates. Blimey! Avast, me proud beauty! For t' most part, buildin' t' rocket was easy. However, gluin' t' fins made from t' aileron stock was a bit tricky t' align properly, and gluin' t' tubes on t' tip was even more challengin' t' get aligned right.

To finish t' rocket, arrr, I used Bondo Glazin' and Spot putty t' fill in t' joints betwixt t' aileron fins and the tubes. Then I applied several coats o' Rust Oleum Light Gray Automotive primer, shiver me timbers, sandin' betwixt each coat. Once I was satisfied, t' rocket be sprayed with a base coat o' Gloss White. Avast, me proud beauty! Then t' Fin Tip Tubes and t' center rin' o' the nosecone was painted Red. Well, blow me down! T' top section o' t' nosecone was then painted Yellow and t' Base part was painted Black. Usin' a small paint brush, me hearties, t' Guns were painted Black, me bucko, and t' missiles be then detailed with a Silver nose, and the tail end Silver, me bucko, Red, shiver me timbers, and Black. Arrr! Blimey!

So far t' Avenger was flown three times. Ya scallywag! First time I launched it with a B6-4 in t' single stage mode. Arrr! Ya scallywag! The rocket did nay go as high as I thought it would, so t' 4 seconds was t' long but t' parachute did deploy in time. A B6-2 would be a better choice for a single stage B motor flight. Begad! Well, blow me down! T' second flight was in two stage mode. Avast! Well, me bucko, blow me down! A B6-0 in the booster, matey, arrr, me hearties, and a B6-4 in t' sustainer. Begad! Great Flight and I be happy t' see that a 12" parachute be t' perfect chute size for this rocket since it gently drifted towards t' end o' t' field and landed betwixt two trees.

T' most recent flight was a two stage flight with a B6-0 in t' booster and A8-3 in t' sustainer. Blimey! It was a perfect flight and recovery. One o' t' Guns peeled off a layer o' paper, me hearties, but I do nay know if that be damage from recovery or handling.