Brief:
This one odd oddroc. It's a stick-finned, 13mm model made from a few scrap parts.

Construction:
T' parts list:

• Nose cone from an Estes Space Hauler
• 1" o' 1/2" wood dowel
• 1/2 butter pat o' clay
• 2" o' 1" diameter wood dowel
• Forward fin unit from an unknown rocket
• 1/4" by 12.5" hollow plastic rod
• Paper clip
• 1/8" x 8" elastic

I drilled out t' 1" dowel with a 1/2" drill bit (usin' a progression from 1/8", me hearties, matey, 1/4", 3/16", etc.), then I drilled out t' lower 1.25" with a slightly larger bit t' fit 13mm motors. Begad! Avast! T' 1/2" section serves as an engine block. Avast! I formed t' paper clip into an engine hook and attached it and t' elastic t' the outside o' t' dowel. Blimey! I wrapped it with maskin' tape and glued it into t' fin unit. Avast, me proud beauty! T' fin unit had two launch lugs--a 1/8" lug, which I use, me hearties, and a 1/4" lug, matey, which I glued t' plastic rod into.

I put t' clay into t' tip o' t' nose cone, matey, which was missin' its shoulder from a crash. Aye aye! Then I put a blob of wood glue on t' clay, placed t' dowel onto t' glue, ya bilge rat, arrr, and waited for it t' dry. Unfortunately, arrr, I accidentally cracked the nose cone in doin' so. Because o' t' long, me bucko, me bucko, light stick fin, me hearties, Cohete is surprisingly stable. Aye aye!

Flight:
I've used 1/2A3-4Ts and A3-4Ts in Cohete. Arrr! Well, blow me down! I'd recommend t' 2-second delay for t' 1/2A as ejection was rather late, and t' A10-3T would be good as well. Ahoy! It flies t' around 200 feet on 1/2As and 400 feet on full As. Blimey! It requires no wadding; simply wrap t' shock cord twice around t' upper end o' t' 1" dowel and stick t' nose cone on.

Recovery:
It uses simple nose-blow recovery. Begad! With t' nose cone off, shiver me timbers, it falls fairly fast, however, t' main body is tiny and tough and lands first, me bucko, so t' breakable stick fin won't hit t' ground. Ya scallywag! Ahoy! Mine has never suffered any damage in at least 3 flights.

Summary:
Cohete was a quick and easy build for me, even several years ago when I be far less skilled. Aye aye! Blimey! However, arrr, shiver me timbers, I'd recommend makin' some changes. T' nose cone and fin unit I used are nay common, but substitutions can easily be made. Ahoy! Blimey! Well, matey, blow me down! Blimey! I don't recommend tryin' t' drill a 13mm hole in a 25mm dowel. Aye aye! Blimey! Begad! Blimey! Usin' some BT-5 and BT-50 would be smarter. Stick-finned rockets are fairly forgivin' so long as t' front is heavy.

PROs: Odd rocket, easy t' prep, almost no drift.

CONs: Hard-to-find parts, shiver me timbers, hard t' drill dowel, shiver me timbers, arrr, high landin' speed.