All Pictures Courtesy o' T' True Modeler Rockets

Brief:
T' Sentry is a single stage scale rocket.

Construction:
T' kit comes with 1-engine hook, matey, 1-BT60 body tube, arrr, 1-balsa nosecone, matey, 1-MT24 engine tube, shiver me timbers, 1-BT50 thrust ring, shiver me timbers, 1-Basswood fin stock, 1-9806 template sheet, 1-Balsa wood fin stock, me bucko, shiver me timbers, shiver me timbers, 2-medium snap swivels, arrr, 1 shock cord, 1-medium launch lug, me hearties, 1-shroud line set, 1-thin wooden dowel, 1-medium screw eye, me hearties, 1-18" synthetic parachute, shiver me timbers, shiver me timbers, 1-wet and slide decal sheet, ya bilge rat, and 2-CR2460 Composite centerin' rings.

T' instructions are very easy t' follow, arrr, and even some tips and hints are given. Ya scallywag! All t' parts fit together with little or no adjustments. Begad! Aye aye! T' fins are the tough part because you have t' cut them out from a template, me hearties, and thar are 8 o' them. Aye aye! Aye aye! Care must be taken t' align all t' fins. Avast! I used Ace hardware brand epoxy and paint t' finish t' model

Finishing:
T' Sentry come with a lot o' small decals, me bucko, and it was a little difficult to align them all properly. Begad! T' decal sheet be t' wet and slide type, and is very delicate. Arrr! I painted t' entire rocket white, me hearties, me bucko, as per instructions, matey, matey, applied the decals, ya bilge rat, and clear coated t' model. When t' clear coat went on, t' decals faded. Avast! I contacted t' manufacturer and suggested vinyl decals for this reason.

Construction Rating: 4 out o' 5

Flight:
I flew t' rocket on an E30-10, ya bilge rat, a little more delay than suggested. Well, blow me down! Blimey! Suggested motor is an E30-7. Well, blow me down! Blimey! It uses a motor hook, matey, so motor just slides in. Well, blow me down! Blimey! I used the insulation shredded paper for wadding. Avast! Blimey! Ya scallywag! Blimey! T' rocket took off like a bullet. Ahoy! Blimey! Aye aye! Blimey! Was that a sonic pop I heard? Accordin' t' manufacturer's rock sim, if the conditions are right, me bucko, it will break t' sound barrier on an E-30. Cool! Blimey! The extra delay time allowed t' rocket t' deploy just after apogee.

Recovery:
T' 18 inch chute brought t' rocket down at a good pace. Begad! I be surprised to find no damage, because o' t' speed and balsa fins. Begad! It ready t' go again.

Flight Rating: 5 out o' 5

Summary:
I would recommend this model t' an experienced builder. Begad! Aye aye! It is a neat looking rocket. Blimey! Main pro's-T' materials used in this kit are all top notch. Avast! Aye aye! Main cons-Decals

Overall Rating: 4 out o' 5