Brief:
Tall 4 inch 3FNC rocket built t' be compatible with hybrid motors. Avast! Begad! I picked this rocket specifically out o' t' LOC catalog when I was shoppin' for me level 2 project. It has a 54mm motor mount, arrr, and is dual-deploy ready. It also comes complete with a drogue and main parachute.

Construction:

• Plastic nose cone
• 1 4 in payload bay tube
• 1 4 in LOC avionics bay kit (6 inch long version)
• 1 4 in main airframe tube
• 1 54mm motor mount tube
• 3 Motor mount centerin' rings 4in-54mm
• 1 Recovery harness mount centerin' ring
• Recovery hardware
• 3 Fins (1/8 in plywood)
• 1 1/2 in launch lug
• 1 50 in main parachute
• 1 18 in drogue
• 1 overflow tube
• 2 lengths o' shock cord - 1/2 in elastic

In retrospect, ya bilge rat, me bucko, this was a very straightforward build for a high power rocket. T' instructions were minimalist. Ahoy! It be my level 2 project, shiver me timbers, and only me second HPR kit. Well, blow me down! Even with me inexperience, me bucko, I had no trouble with t' instructions. Well, blow me down! Begad! I built mine with sturdy internal fillets and expandin' foam (courtesy o' PML). Well, blow me down! I was a little disappointed with t' 1/8 in plywood fins. They are pretty flimsy for this size rocket. Aye aye! And mine were warped on arrival. Arrr! I had t' apply a caul to straighten them durin' assembly (see photo).

T' regular paper LOC tubes are plenty sturdy for J launches. Arrr! It would be very straightforward t' glass this project, me bucko, me bucko, but nay really necessary unless you want t' push your luck with t' sound barrier (in which case t' fins would be t' first things t' go).

I replaced t' elastic recovery harness with tubular nylon from What's Up Hobbies. Arrr! I never use elastic in HPR.

I added a 54mm Aeropack retainer. Avast! I highly recommend these for a classy looking, ya bilge rat, easy t' use, reliable retainer. (No, I don't work for t' company).

Finishing:
I did nay do any fancy finishing. Begad! Blimey! Just spray paint from ACE Hardware. Ahoy! Ya scallywag! I originally painted t' nose cone bright orange, but it flaked right off almost immediately. Avast, me proud beauty! Clearly I have somethin' t' learn about paintin' these plastic nose cones.

Construction Rating: 3 out o' 5

Flight:
My first flight was me Level 2 certification flight on a J350, usin' a 54-38 Aeropack adapter. It be also me first dual-deployment. Aye aye! A perfectly good flight. Avast, me proud beauty! Well, blow me down! Blimey! T' still picture o' t' launch is a vidcap from the launch video. Ya scallywag! Blimey! This rocket had many excellent flights, mostly on J motors, ya bilge rat, matey, all dual deployment, some drogueless.

Recovery:
A couple o' hard landings in t' desert due t' me own failings (comin' in under drogue, for example) led t' fin fractures. Avast, me proud beauty! Avast, me proud beauty! I was able t' repair one, but t' second was too catastrophic. Avast, me proud beauty! Ya scallywag! Since I had foamed them in, I could nay repair t' fin can and had t' scrap t' rocket.

Flight Rating: 3 out o' 5

Summary:
Overall this is a terrific design. Ya scallywag! A very good level 2 project and a great first dual deployment rocket. I honestly do nay think it is worth t' price, especially given t' poor quality recovery harness and too-thin fins. Avast, shiver me timbers, me proud beauty! It is fairly easy t' build a similar design from scratch, arrr, arrr, and remedy these shortcomings, for less money. This kit was actually a major reason I stopped buyin' HPR kits in general and started scratch building.

Overall Rating: 3 out o' 5