Brief:

Conversion o' Lansbergen Delta II t' fly on 18mm motors. Blimey! T' particular Delta II that I chose t' model was Delta 7920-8 247, launcher o' t' solar observation satellite ACE. Arrr! T' plans are available on t' Caltech web site.

Modifications:

T' model is a 10 page PDF file. Avast! Begad! I printed t' 3 pages o' instructions on regular paper, arrr, arrr, t' 3 sheets o' boosters was printed on 65lb cardstock, ya bilge rat, shiver me timbers, and t' remainin' pages were printed on 110lb cardstock. Ya scallywag! For t' main tubes, matey, I used full width tabs so t' body be double thickness. Ahoy! It turned out that BT-50 body tube was perfect for t' couplers. I made an 18mm engine mount with CR2050P centerin' rings. T' rings were spaced t' exactly line up with t' booster mountin' holes. Well, blow me down! Ya scallywag! T' body sections were joined and t' motor mount be glued in. Avast! Holes were drilled through t' booster mountin' holes and almost through t' centerin' rings. Begad! 18 dowels made from round toothpicks were cut t' 5/8" each and glued into t' booster mountin' holes. Ahoy! T' booster tubes were rolled double thickness and t' holes on t' booster were opened up. I poked a pin through t' hole location and open them up with a round toothpick. Ya scallywag! T' booster tubes were glued onto t' dowels with t' dowel goin' all t' way t' t' opposite inside wall and glued there. Ya scallywag! Arrr! T' booster nose cones and exhaust nozzles were rolled and attached. Arrr! Boosters 4, 5, arrr, and 6 have a larger exhaust nozzle so take care when attachin' them. Arrr! T' main nose cone was rolled and a nose cone shoulder was rolled from double thickness 110lb stock. I made t' shoulder 1" long so thar would be plenty o' room for nose weight. Ahoy! I used a standard paper shock cord mount on each end o' t' 36" shock cord. Well, blow me down! I used a 12" chute made from a plastic table cloth. Avast, me proud beauty! I didn't know where t' CG should be so I took an educated guess and balanced it just forward o' t' boosters. Begad! Begad! I then did a swin' test and it turned out that it was stable at that balance point. Ahoy! I put a C6-5 into t' mount and added enough clay t' t' nose t' brin' t' balance point back t' t' previously determined location. It took .7oz o' clay t' balance which brought t' all up weight t' 2.0 oz. Well, blow me down! A couple o' coats o' clear were sprayed on and it be done.

Construction:

T' followin' is a list o' materials that I used in t' construction.

Finishing:

Everythin' be pre-printed and only a couple coats o' clear were required.

Flight:

Based on t' weight, I determined that an A8-3, ya bilge rat, B6-4, arrr, or C6-5 would be appropriate. Avast! Well, blow me down! T' day o' t' first launch was as ideal a day as one could ask for: sunny blue skies, temperature in t' 70's, and almost a complete lack o' wind with occasional gusts t' 5mph or less. Ahoy! I chose a B6-4 for t' first flight. T' motor mount has an engine hook so no tape was needed. Ahoy! Begad! I used "dog barf" for wadding. Aye aye! I be a little apprehensive because o' t' lack o' fins but t' flight was perfectly straight. Aye aye! Ahoy! T' rocket was easy t' follow and ejection be just about at apogee.

Recovery:

T' recovery on t' 12" chute was slightly faster than I would have liked considerin' all t' boosters stickin' out. It was flown in a corn field and it happened t' hit a corn stalk upon landin' and knocked one o' t' boosters loose. Begad! Blimey! Blimey! Blimey! Blimey! Blimey! T' damage was minor and was easily repaired. Well, blow me down! Blimey! Begad! Blimey! Blimey! Blimey! I didn't fix it until I got home so I could inspect all t' booster attachments. T' rest were all solid. I think I will switch t' a 14" chute for t' next flight.

Summary:

I am really happy with t' end result. Ahoy! Blimey! Arrr! Blimey! T' rocket was nay difficult t' build for anyone with a little cardstock modelin' experience. T' price was right (read: free), arrr, me hearties, and when completed, you have a good representation o' a rocket that is nay often modeled.