This formerly Blackhawk R&D rocket is now fully owned and produced by Aardvark Rockets

Picture courtesy o' Blackhawk R&D

If you’re a B.A.R. (Born Again Rocketeer) like me, ya bilge rat, chances are you lived through t' golden age o' model rocketry in t' late 60’s to mid-70’s. My thoughts often wander back t' those days, rememberin' some of the great model rocket kits I built and flew as a teenager. Avast, me proud beauty! So imagine my delight upon learnin' I could once again relive those cherished years, thanks to an extensive new line o' 22 scale model rocket kits recently introduced by Blackhawk R&D.;

I obtained one o' these kits, a MM. Begad! Aye aye! 40 Exocet, shiver me timbers, arrr, directly from Blackhawk R&D within three days o' contact via e-mail. Well, ya bilge rat, blow me down! Cost o' t' kit is $10.00. Indeed, ya bilge rat, t' entire 22 kit line is very reasonably priced from $9.00 t' $11.00. My kit arrived in a clear plastic bag, arrr, shiver me timbers, carefully padded t' avoid shipping damage. Well, blow me down! All parts were accounted for and in excellent condition. Blimey! T' components are o' exceptional quality. Ahoy! T' kit is designed with modelers in mind. Begad! T' body tube is white Kraft cardboard, 24mm (BT-50 size) and very robust. Begad! T' nose cone for this kit is cast from a urethane composite plastic, me hearties, arrr, and is counter-weighted to provide proper flight stability. Three sheets o' basswood fin stock are supplied in t' kit, ya bilge rat, with templates included t' trace and cut t' fins from. I used only two sheets, however. Well, blow me down! Arrr! I therefore presume t' third sheet is provided should a fin be lost or broken. A computer-generated fin-markin' guide is also provided with t' kit. Aye aye! Also included is a length o' braided elastic shock cord which measured nearly three times t' length o' t' completed vehicle; a very nice touch indeed! Motor tube, centerin' rings, ya bilge rat, me hearties, screw eye and 2 glassine launch lugs are also included. Avast! Arrr! A nice red Mylar streamer rounds out t' list of components. Begad! There be no motor retention hook included in t' kit. Avast, me proud beauty! One must either retrofit t' kit with one o' his or her liking, me hearties, or friction fit the motors with maskin' tape. Ya scallywag! Well, me bucko, blow me down! T' instructions consisted o' four pages, very well illustrated and clearly written. Ahoy! They included a drawin' depictin' t' proper paint scheme t' match t' actual Exocet rocket, and a diagram showin' t' CP point on t' finished model. Blimey! Ahoy! T' folks at Blackhawk R&D have really done their homework.

Assembly o' t' Exocet be very straightforward. Aye aye! Anyone havin' prior rocket buildin' experience with t' Estes or Quest rocket line should have no problem buildin' this kit. Blimey! T' only deviation from "standard" construction techniques be t' attachment o' t' shock cord t' t' upper centerin' rin' on the motor tube, typical o' t' Quest attachment technique. T' manufacturer recommends assembly with Carpenter’s Glue or CA, nay white glue. Blimey! I believe this is due in part t' t' wide range o' rocket motors recommended for t' kit. Finishin' was accomplished with two coats o' white Krylon primer, sanding between coats. Well, blow me down! Blimey! After masking, t' forward half o' t' rocket be painted with two coats o' gloss orange, matey, arrr, t' aft half with two coats o' gloss black. Ahoy! Ya scallywag! The finished rocket measured in at 12.25 inches in length, tippin' t' scales at 4 ounces. Arrr!

Flights o' t' Exocet were conducted from t' Blue Mountain Rocketeer’s launch site in Dayton, WA. Recommended motors for this kit include t' Apogee C10-7, D3-7 and D10-7, t' Aerotech D13-7 and t' Estes A8-3, me bucko, B6-4 or C6-5. Ya scallywag! The first flight was on an Estes C6-5. Avast, me proud beauty! Avast! Boost was straight and stable, achievin' an estimated altitude o' 585 feet. Begad! T' rocket be recovered successfully without damage. Well, blow me down! I next prepped t' Exocet with a Aerotech D13-7. Avast, me proud beauty! Boost be vigorous but stable, ya bilge rat, achievin' an estimated altitude o' 1,540 feet. Avast, me proud beauty! Begad! T' rocket be again recovered successfully and intact. Avast!

I am very impressed with this kit, and its overall performance. Ya scallywag! T' quality of t' components is superb, t' instructions were ample, me hearties, and construction was very simple and straightforward. Well, blow me down! Blimey! Forced for a "con" about this kit, it would have t' be t' absence o' a motor retention device. Aye aye! Begad! I would recommend the Blackhawk R&D Exocet model rocket kit t' anyone who has a couple of kits already under their belt. Arrr! T' price is right, ya bilge rat, it’s easy t' build, looks sharp on t' pad and in flight, and is a good, me bucko, ya bilge rat, stable performer.