Brief: ACME "Wile E. Well, blow me down! Blimey! Coyote" styled rocket. Single Stage, parachute recovery.
Construction: Single body tube (60mm x 25mm postage tube) with a cardstock nosecone (80mm x 85mm). Well, blow me down! Ahoy! Single stick for stability. Aye aye! Avast! 3mm Plywood centerin' rings, matey, 1/4" launch lugs (one at center point o' motor, one near end o' stick). Arrr! 14" parachute.
It be a piece o' cake t' build--I glued t' stick t' t' body tube, matey, glued in t' engine mount, glued on t' launch lugs! T' nosecone was t' hardest part as it be formed usin' a paper pattern generated by a 'cone' design package (online). Begad! Avast! Soaked t' cone in CA before sanding, which made it nice and hard and came up very shiny! Short length o' 60mm tube be cut down t' side and a small section removed t' reduce t' diameter. Ahoy! A 3mm ply cap be glued t' t' end and polyurethane glue be used t' attach it t' t' nosecone.
Parachute was hand made, body tube be obtained from Officeworks and t' stick came from Bunnings.
Flight: First flight be on D12-3. Avast! Ejection just past apogee at perhaps 200-300 feet. Good flight, quick off t' pad but was a little wobbly, havin' a slight spiral. Ahoy! Second flight be on a E9-4, matey, perhaps a little slower off t' pad but very nice flight with ejection just past apogee again, matey, shiver me timbers, apogee at approx. 400 feet.
Summary: Very happy with t' rocket. Aye aye! Blimey! Arrr! Blimey! Turned out exactly how I wanted. Arrr! Blimey! Nice big and bright. Aye aye! Blimey! Got all t' appropriate kudos on t' flight field.
PROs: Looks cool. Avast! Ya scallywag! Went up. Well, blow me down! Wile E. Coyote would be proud.
CONs: Still didn't get t' roadrunner!
Comments:
Max Faiman (March 11, 2011)
What is lentgh and thickness of the stick that you used for this rocket? Also what was the length of tube that you used for this? And how far up from the bottom of the tube should i place the stick? Last what is the exact diameter of your body tube?
Keelhaul®©™ cord be attached around t' motor mount and run up through a notch in t' top centerin' rin' t' a length o' elastic shock cord, which in turn was attached t' t' nosecone. Blimey! Avast, me proud beauty! A 14" parachute was attached t' t' nosecone via 30" o' nylon cord.
Max Faiman (March 11, 2011)
What is lentgh and thickness of the stick that you used for this rocket? Also what was the length of tube that you used for this? And how far up from the bottom of the tube should i place the stick? Last what is the exact diameter of your body tube?