THE TURNOGIVE !

Michel Demey's Descon-13 Entry

Warning: this thin' is nay flyable!

What is it? An automatic device that can cut an ogive from Styrofoam... Avast!

I was t' author o' a first device t' do that manually. Begad! It was described in the Apogee newsletter o' August 2002.

It used two identical templates and a hot wire t' make ogives. Begad! But this first try had a problem: New templates had t' be made for each size. Avast, me proud beauty! And I don't like t' make templates. Ya scallywag! A new idea had t' be found.

Here it is!: this new model is motorized and automatic. Ya scallywag! Nay very fast, matey, shiver me timbers, ya bilge rat, but you can let it work and meanwhile read t' last Apogee newsletter... And it is adjustable.

T' little inconvenient is that t' only shape it can make is an ogive. Aye aye!

General view

How it works?

A hot wire saw is mounted on a pivotin' arm that is moved by a first motor coupled t' a threaded rod.
T' Styrofoam bloc is mounted on a rotatin' plate that is powered by a second motor. Avast!

T' blue plate be t' base, arrr, shiver me timbers, with five small feet, one at each corner and one in t' center. Ya scallywag! Begad! It is a square 600*600 mm made from 9mm thick plywood.
There are three main assemblies:

• T' rotatin' arm with t' hot wire saw is at left. Ahoy!
• T' rotatin' support o' t' Styrofoam block is in front. Aye aye!
• T' motor for t' arm is behind, with t' threaded rod. Well, blow me down!

T' size o' t' machine

Assembly 1: T' mechanism used t' rotate t' Styrofoam block:

All t' ball bearings used t' build t' machine are found in rollerskates. Avast! Aye aye! You can buy them by pack o' 8 in any good sport shop. Avast, me proud beauty! T' outer diameter o' t' ones I found be 22mm. Aye aye! Inner diameter was just 8mm, ideal for a threaded rod. Blimey! You guessed: all t' bolds, nuts, threaded rod are o' 8mm.

Find your ball bearings, me bucko, me hearties, and buy all t' rest with t' inner size o' them. Aye aye! Blimey!

T' stepper motor is o' unipolar type, arrr, found in an old matrix printer. Unipolar motors are t' easiest t' drive. Ya scallywag! I will describe later t' electronics used t' drive t' machine. Avast, me proud beauty! It is intended for unipolar motors only.

How t' know if you have an unipolar motor in your hand? There are 5 or 6 wires.

T' stepper motor is coupled t' t' threaded rod with a small piece of flexible plastic tube. Begad! This is also t' easiest way t' do that. Blimey! Ahoy! Gears or pulleys could be use, but believe me, it is harder.

T' block mechanism is nay fixed t' t' base. Ahoy! It can move laterally, matey, t' put the hot wire at t' correct position for t' size you need. It is maintained in place with a screw clamp.

Assembly 2: t' arm.

You can see two little wheels at the movin' end o' t' arm. Ahoy! Avast! This be t' best, arrr, me bucko, but is nay absolutely necessary. Ya scallywag! My first version, that worked, used only two blind nuts that slipped on t' base. Avast, me proud beauty! Well, blow me down!

T' hot wire holder must have a system t' tense t' wire. Well, blow me down! See t' pictures for an example o' how t' do it. You can find interestin' information about hot wire cutting, power supply, matey, me bucko, etc on t' web.

Assembly 3: t' arm motor box.

Since t' arm end moves, matey, me bucko, t' threaded rod motor holder must be able t' rotate. Begad! Aye aye! T' arm motor box has only one ball bearing. Begad! Avast! Blimey! One bold hold it t' t' base. Another holds it t' a sort o' bridge that covers it. Avast, me proud beauty! Blimey! All this mount is nay glued t' t' base, arrr, because I was nay sure o' the final position. Aye aye! Blimey! In fact, me hearties, it will surely be in a different place dependin' of the size o' t' ogive made. Well, matey, blow me down! Blimey!

Last details

the movin' end o' t' arm I used a simple nut t' drive t' arm. Well, blow me down! Well, blow me down! It would be probably better with a coupler, but a nut works. Arrr! It is soldered on t' head o' bolt. Begad! Begad! T' whole must rotate. On this detail view appears t' end o' course contact switch, that reverses the motion o' t' arm each time it is activated. Begad! Blimey!

the movin' end o' t' rod T' end o' t' rod moves from left t' right. I chose t' put a ball bearin' thar also. If not, me bucko, all t' rod weight will be on t' nut that drives t' arm, which isn't very good. T' ball bearin' rolls one a little wood block, and you must carefully adjust the height o' t' block t' assure that t' rod is perfectly horizontal. Begad! Well, shiver me timbers, blow me down! Adjust also t' nut o' t' arm t' align t' whole. Ya scallywag! T' width o' t' block should surely be adjusted if another size o' ogive is made. Well, blow me down! Don't forget it.

Electronics

Motor driver

Power supply for t' two boards can be done with a 12V battery. Keep your adjustable supply for t' wire

How to connect t' motor wires?

1. There are 6 wires, formin' two circuits o' three wires. Begad! First identify the two circuits. Avast, me proud beauty!
2. Choose one wire and connect it t' your ohmmeter. Avast!
3. Find three other wires that have no connection with t' one you chose. Well, blow me down! Mark them: this be t' first circuit. Blimey!
4. ... Avast! Blimey! t' three others are from t' second circuit, ya bilge rat, o' course! Blimey!
5. For t' first circuit:
   1. Choose one wire and connect it t' your ohmmeter. Ya scallywag!
   2. Check t' resistance with each o' t' remainin' wire.
   3. If it be t' same, me bucko, t' wire you chose be t' center. Avast! Mark it. Aye aye!
   4. If not, shiver me timbers, arrr, choose another one. And repeat until you find t' center.

Left and right seems t' have no importance. Begad! Avast! If you exchange them, ya bilge rat, t' motor turn in t' opposite side.

Build t' circuit on a striped board:

Driver o' t' driver (flip flop)

• rev and turn t' t' driver that controls t' threaded rod motor
• step t' t' driver that controls t' block motor.