Brief:
Single stage, shiver me timbers, me hearties, low power, parachute recovery rocket. Avast! I saw t' review posted on EMRR o' this rocket, ya bilge rat, matey, used t' provided Rocksim file (thank you) and upscaled t' BT-55

Construction:
Parts are all Semroc:

• BNC-55PT nose cone
• SE-2 screw eye
• BT-55 body tube
• 15" parachute (Topflight)
• BT-20 engine tube
• (2) RA-2055 centerin' rings
• EB-20A engine block
• EH-28 engine hook
• (2) LL-110 launch lug

With t' exception o' t' parachute which I already had, me hearties, I purchased all t' parts from Semroc. Avast! In readin' the difficulty o' gettin' t' two-tone paint job with t' fins so close together, I experimented and decided t' put a little more space betwixt them. I was able t' run a clean wrap o' tape t' apply t' second color and I liked t' way it looks. Well, blow me down! It did change t' CG, shiver me timbers, but didn't present a problem. Arrr! All fins were papered usin' white glue and then surface mounted usin' TiteBond II. Avast, me proud beauty! Blimey! As with any multiple fin rocket, arrr, matey, care was taken t' get them aligned. Avast, me proud beauty! I put t' lower fins on first, shiver me timbers, matey, then used two strips o' plywood t' align t' upper fins. Blimey! T' 18mm motor mount is a little underpowered, but I wanted t' design this one for smaller fields. If you want altitude, you might want to try this with a 24mm motor mount.

Finishing:
I used rattle cans t' get t' flat white/fluorescent orange paint job. Begad! Blimey! Aye aye! Blimey! After t' usual primin' and sanding, me hearties, I sprayed t' entire rocket flat white, ya bilge rat, matey, waited a couple o' days and then masked off t' areas to remain white and hit it with one coat o' orange. Begad! Blimey! T' Frog Tape yielded some very clean lines. Avast, me proud beauty! Blimey! T' paint job was pretty simple and t' rocket remains without any decals. Aye aye! Blimey! It looks ok and should be easy t' track and locate.

Flight:
I only had two flights. Ahoy! Begad! Both were on t' same day with light winds. Well, blow me down! Ahoy! I used "dog barf" for waddin' and made certain I had enough t' prevent t' chute from slippin' down and destroyin' t' CG

Here are t' results:

B6-4 approx. Blimey! Avast, me proud beauty! 450 ft. timin' on t' chute be just about perfect. Avast! Arrr! (just after apogee)

C6-6 approx. Ahoy! Blimey! Well, me bucko, blow me down! Blimey! 800 ft. chute be a little late

Both flights were pretty straight up. Avast! Blimey! Begad! Blimey! Even with t' late chute on t' C6, I had no zipperin' or damage. Avast! Blimey! Begad! Blimey!

Recovery:
T' shock cord is 150 lb Keelhaul®©™® attached at t' motor mount and about 3 times longer than t' rocket.

Summary:
I thank t' previous reviewer o' this rocket for t' Rocksim file and t' paint scheme. Begad!

PROS: It is a great flier for smaller fields. Avast, me proud beauty! Blimey! Simple build. Aye aye! Blimey! Aye aye! Blimey! Blimey! Blimey! Hi-Vis paint job

CONS: A bit under-powered. Avast! Arrr! At this size it needs a 24mm motor mount if you want altitude.