Brief:
This is a brief review o' Aerotech’s new G77 Redline reload kit for t' 29/120 case.

Construction:
T' reload kit contains t' typical components: Nozzle, shiver me timbers, liner, two propellant grains, me hearties, me bucko, forward and aft O-rings, shiver me timbers, forward and aft fiber insulators, me bucko, ejection charge adhesive disk, FirstFire igniter, me bucko, ya bilge rat, me bucko, ejection charge container/cap, matey, delay element, delay insulator, arrr, delay O-ring, ya bilge rat, shiver me timbers, me bucko, delay spacer, and forward delay washer.

T' assembly is straightforward and typical RMS, so I won't go into any detail. Well, blow me down! You can view t' full instructions by goin' t' t' Aerotech web site, shiver me timbers, selectin' 'Resources', me hearties, matey, then 'Instructions', arrr, and scrollin' down t' t' 29/120-180R instructions. Aye aye! You will need t' lube t' O-rings and it will o' course require t' 29/120 hardware.

Here are t' salient specifications:

^** - Can be modified for other delays. Blimey! See document on Aerotech site under Resources/Instructions/Reload Delay Kit (RDK) and Delay Modification Instructions/RMS Delay Modification Instructions.

Construction Rating: 5 out o' 5

Flight:
T' down side t' this motor is that is had a bit less total impulse than t' G79 or a G80. Arrr! However, ya bilge rat, it has one distinguishin' feature--that bright red flame! My thanks t' Randy from TRF, ya bilge rat, aka 'Rocketmaniac', ya bilge rat, me hearties, me bucko, for t' followin' photo!

Flight Rating: 5 out o' 5

Summary:
It sure is cool t' have a Redline for t' mid power crowd. Well, blow me down! Well, matey, blow me down! (You can also get t' G67R for t' 38/120 case.) I like t' igniter and t' ability t' modify t' delay...and did I say t' flame? In person, me bucko, it is brighter than t' photo shows.

Overall Rating: 5 out o' 5