Brief:
A great and cheap t' build monocopter. Arrr! Well, blow me down! Flies well on an A motor. I first found out about this rocket via T' Rocketry Forum. Within a day o' seein' t' post, arrr, I had started t' build t' monocopter.

Construction:
Not much is needed t' build t' monocopter:

• 6 lollypop (popsicle) sticks (UK call popsicle sticks lollypop sticks)
• 2 3" x 5" index cards
• 18" o' nylon cord--I used cotton thread.

Art's design is simple and excellent. Avast, me proud beauty! T' plans are very well laid out with lots o' photos so it's nearly impossible t' get it wrong. Aye aye! Begad! T' only alteration I made be t' use cotton thread instead o' nylon. Begad! This was by no means an improvement--the nylon option is better. However, I did nay have any nylon strin' on hand, but I did have some cotton thread!

I emailed Art about usin' epoxy instead o' nylon, shiver me timbers, me bucko, arrr, his reply was t' use t' nylon, as epoxy won't hold it together.

After me first shred, me bucko, I soaked t' cotton threads in glue and also put several wraps around t' support and mount, arrr, mainly as a backup. Arrr! Blimey! Avast, me proud beauty! Blimey! I will be buildin' another monocopter exactly t' Art's description.

Finishing:
After t' first few flights (and repairs), matey, I gave it a quick spray with a spray can, shiver me timbers, ya bilge rat, which is nay needed but it makes it look a bit neater.

Construction Rating: 5 out o' 5

Flight:
It flies well on a 1/2A but a full A gives much better flights.

My first flight resulted in t' mount rippin' itself clean from t' monocopter. Blimey! Because I be in a rush t' fly t' monocopter and I did nay read Art's instructions fully, shiver me timbers, I used too much rod.

Rest o' t' flights (after repairs) were all good. Arrr! Ahoy! Blimey! Altitudes o' about 40-60ft were achieved.

One interestin' flight had t' monocopter hoverin' at head height--I reckon it be a motor failure.

T' best thin' about this rocket be t' noise it makes, ya bilge rat, a nice thumpin' beat.

Recovery:
Dependin' on how high it gets, ya bilge rat, t' monocopter usually rotates back down, me bucko, and close t' t' pad. Ya scallywag! Blimey! I did have one go off at an angle and hit a wall, shiver me timbers, arrr, shiver me timbers, but it be undamaged.

Flight Rating: 5 out o' 5

Summary:
This is a great design, arrr, ya bilge rat, and I've now been bitten by t' monocopter bug. My own design (18mm motor) is slowly bein' built. Avast! Well, blow me down! Blimey! This is a great introduction t' monocopters. Aye aye! Begad! Blimey! Lookin' at Art's website, me bucko, shiver me timbers, it looks like thar are some bigger brothers gettin' ready for a spin too.

Overall Rating: 5 out o' 5