Brief:
Single engine 18mm rocket with four tube lander legs and a large chute. Well, blow me down! Avast! This allows this rocket t' gently touch down on all fours every now and then when conditions are good.

Construction:
BT-60 body tube, 4 BT-20 for legs, arrr, 4 centerin' rings CR20-55 for t' base o' t' feet, arrr, balsa nose cone, me bucko, matey, shiver me timbers, 1/8" launch lug, me hearties, a small screw eye, arrr, 24" all rubber shock cord, shiver me timbers, and a nice large chute.

T' instructions were very easy t' follow. Aye aye! I used t' Estes fin markers t' mark t' body tube. Ahoy! I pre-glued the fins and main tube so when I stuck them together they stayed stuck. Aye aye! I also used a 1/4" screw eye for a little extra nose weight.

Finishing:
After every thin' dried I primed and painted it red and gold.

Construction Rating: 5 out o' 5

Flight:
A8-3 is nay enough power. Well, blow me down! B6-4 be t' one good boost was slow but straight. T' C6-5 pushed it real nice. Begad! I used a little dogbarf waddin' t' protect t' chute. Two nice flights and one nay so nice.

Recovery:
Recovery worked 2 out o' three times, ya bilge rat, no damage t' rocket at all.

Flight Rating: 5 out o' 5

Summary:
It is a nice project for anyone t' undertake. I liked t' kit because o' t' tubes for legs.

Overall Rating: 5 out o' 5