Brief:
Convertin' t' existin' Silver Comet t' t' once available V2.

Modifications:
I wanted t' recreate t' V2 in an inexpensive way usin' readily available parts. Avast, me proud beauty! My first purchase be t' Estes Silver Comet rocket kit. Avast! Begad! This was t' same platform that t' old V2 from Estes was built on. Avast! Aye aye! T' next step was t' get t' fin pattern from Jimz plans online. Blimey! I downloaded t' fin pattern and took it and t' Silver Comet fin t' t' copy machine. Arrr! I used t' Silver Comet fin as a guide t' get t' old V2 plan t' match. T' V2 fin pattern be blown up t' finally match t' tabs on t' Silver Comet fins. At this point I had t' fins t' correct size.

T' next obstacle be t' nose cone. Well, blow me down! Arrr! T' Silver Comet nose conehas a great little relief where t' windshield would go. Well, blow me down! All o' me V2 research has nay found one with a windshield so that had t' be scrapped. Estes makes t' nose cone BCN80 ( Phoenix rocket nose cone). Begad! I picked one up and it worked out great.

I had intentions o' flyin' this rocket on t' D series engines from Estes as recommended. However, me hearties, I knew I would eventually want t' push t' envelope. Begad! Blimey! I assembled t' entire rocket with 30 minute epoxy. Buildin' strong filets as I went along. Avast, me proud beauty! Ya scallywag! T' entire rocket be then painted with sandable primer. Avast, me proud beauty! Ahoy! And sanded, shiver me timbers, and primed, and sanded, and primed, and etc. Begad! Well, blow me down! A top coat o' gloss white followed by a black and gold pattern. Well, blow me down! It makes a strikin' appearance.

Flight:
T' first flight was on a D12-3 because o' t' size o' t' rocket. Aye aye! T' first 4 flights were perfect. Well, blow me down! Blimey! Great slow flight with ejection right after appogee. Arrr! Ahoy! Then it was t' test. Arrr! Ahoy! I loaded an Aerotech E30-7 for t' first time. Ya scallywag! I be nervous from all t' work that was put into this thing. It took off t' pad with a bang. A perfect flight t' around 1400 feet. All o' t' flights so far have been straight and picture perfect. Ya scallywag! T' rocket is showin' some wear inside t' tube but thats t' be expected. I used a LOC/Precision style shock cord mount by buryin' t' cord in a mound o' epoxy on t' inside o' t' body tube and it has held fine so far.

Summary:
My next modification will be t' lose t' cheesy Estes chute and go t' a nylon chute. Begad! Avast! It will fly a few more times and then be shelved for a later date.