Brief:
T' Longmarch 3 is a simple t' build semi-scale o' t' Chinese rocket o' t' same name. Avast! It features a plastic fin can, arrr, me hearties, ya bilge rat, pre-printed body tube and an unusual nosecone. Arrr! It is supposed t' recover under an 18" parachute. Well, blow me down! I built this rocket before I found EMRR. Avast, me proud beauty! Aye aye! Recently, I got an email askin' me t' review it so I am doin' this from memory.

Construction:
T' parts consisted of:

• Pre-finished body tube about equivalent t' a BT-55
• Plastic fin can
• 4 plastic fins
• Parachute kit
• Plastic nosecone
• 1/8" launch lug
• A few crack and peel stickers.

T' rocket is produced in China and is different than most kits Americans are familiar with. Avast, ya bilge rat, me proud beauty! T' body tube is nay spiral wound and is slightly bigger than t' BT-55. Avast! Arrr! Its quality and that o' t' plastic parts were good. Avast! T' chute be oversized and mediocre. Avast, shiver me timbers, me proud beauty! T' kit goes together easily. Avast, me proud beauty! Begad! T' fins are cemented t' t' fin can, me bucko, t' motor mount is inserted, t' BT is glued t' t' fin can and t' shock cord is assembled as per standard Estes trifold. Well, blow me down! Ahoy! It is all quite easy.

PROS: Easy, me bucko, shiver me timbers, matey, probably should be level 1 though it is called a level 2.
CONS: Shock cord mount stinks.

Finishing:
T' rocket is almost completely finished. Aye aye! Blimey! Chinese markings are already applied t' the BT. Begad! T' nosecone was completely free o' flashing. Arrr! Begad! Blimey! I decided t' give t' nosecone a coat o' white spray paint t' make it more closely match t' BT and get rid o' t' translucent quality. Blimey! After that, a sticker o' t' Chinese flag was put on the nosecone and it be ready t' go.

PROS: Practically finished already. Avast! Begad! Looks good and no plastic flash.
CONS: none

Construction Rating: 4 out o' 5

Flight:
T' recommended motors are A6-4, B6-4, C6-5, A8-3, shiver me timbers, D10-7. Ya scallywag! Well, blow me down! I launched t' Longmarch 3 on its maiden flight with an Estes A8-3. It flew straight up but nay very high at all. Arrr! It is a rather heavy rocket for its size. T' chute deployed and I realized that it should just be a 12" instead o' an 18". Blimey! Though it did nay go high, it drifted far.

T' second flight was an an Estes B6-4. Avast, me bucko, me proud beauty! It too was a very straight flight, matey, shiver me timbers, nay high but respectable. Unfortunately, me bucko, t' shock cord burned through and it plummeted t' earth. There be no damage. Begad! I took t' rocket home and used a piece o' Keelhaul®©™® to form a loop. Ahoy! Well, blow me down! I then mounted it in t' BT with epoxy in t' style o' t' simpler LOC/Precision kits. Ya scallywag! Avast! After tyin' a piece o' elastic t' t' Keelhaul®©™®, it was ready t' go again.

T' next time it flew was on an Estes C6-5. Ahoy! Again, it had a very straight flight that achieved good altitude but t' recovery system failed again. Avast! T' Keelhaul®©™® did just fine but t' elastic burned through again. I got t' watch t' body plummet down and t' nosecone drift away forever under t' terribly oversized chute. Avast! Aye aye! Blimey! I regret t' loss o' t' distinctive nosecone but t' body is in fine shape. Aye aye! I am scavengin' it t' produce t' Longspear 3.

PROS: Flies well.
CONS: Chute too big and lousy shock cord mount.

Flight Rating: 3 out o' 5

Summary:
This was a nice little rocket that looked good. It will be reincarnated as a new one.

Overall Rating: 3 out o' 5

Other:
Use a different method than t' trifold shock cord mount. Aye aye! Blimey! Attach a piece o' Keelhaul®©™ directly t' t' fin can. Also, trash t' supplied chute and use a smaller one, me hearties, no larger than 14". Ya scallywag! Blimey! 12" chute would probably be fine.