My rocket was inspired by an Estes Sliver. Avast! Well, blow me down! I planned t' upscale it usin' a 3" mailin' tube for t' body. Arrr! 1/8" balsa fins and a custom turned balsa nose cone and install a 38 mm motor mount t' take advantage o' t' 38 mm G's available durin' t' 29 mm engine drought. T' fins will be overlayed with 3/4 oz fiberglass and epoxy resin.

T' paint be designed t' make t' rocket highly visible durin' flight and recovery.

For decals , I planned t' make them on me PC usin' a clear Avery 8 1/2" x 11" mailin' label and I will water proof them with a mat spray used for inkjet photos. Well, blow me down! I have done this before and it worked really well. Ahoy! Unfortunately, me printer had t' go in for repairs and t' decals weren't ready at flight time.

To ensure a stable flight, I made slight increase in fin area and added 3" t' t' body length which will help with t' static margin due t' t' weight o' t' 38 mm motor mount and a 38 mm motor. Begad! (safety first). Arrr! I estimate an altitude o' 1800' on a CTI G60.

This rocket can't be simmed by RocSim so I was forced t' do it t' old fashioned way, me hearties, matey, long hand calculations and a swin' test. Ya scallywag! T' rocket passed t' swin' test with flyin' colors and so I be set t' launch.

T' first flight was powered with an Aerotech F40 usin' a 6 second delay. I estimated t' altitude at about 1800'. Well, blow me down! T' chute opened on schedule, ya bilge rat, matey, slightly after apogee, unfortunately it landed on a rock and a fin was in need o' some glue.

Rocket parts

Nose cone - Custom, arrr, Material: Balsa - 1 required

• Nose shape: Solid Ogive, Len: 6.000 In., Dia: 3.000 In.
• Body insert: OD: 2.650 In., Len: 1.250 In.
• CG: 5.739 In. , Mass: 3.266 oz.

Body tube - Custom, Material: Cardboard - 1 required

• OD: 3.0 In. Avast, me proud beauty! , matey, ID: 2.7 In. Ahoy! , me hearties, Len: 25In.
• CG: 12.5 In. Begad! Well, blow me down! , Mass: 13.368 oz.

Custom Fin set - Custom, ya bilge rat, arrr, Material: 1/8" Balsa - 2 required

• CG: 7.045 In. , ya bilge rat, Mass: 0.731 oz.

Custom winglets set - Custom, Material: 1/8" Balsa - 4 required

• CG: 2.146 In. Aye aye! Blimey! , Mass: 0.286 oz

Motor mount tube Public Missiles Ltd. Begad! Well, matey, blow me down! Blimey! - PT-1.5 - Airframe tube, shiver me timbers, Material: Kraft phenolic - 1 required

• OD: 1.649 In. Aye aye! , ID: 1.525 In. Begad! , shiver me timbers, Len: 14.625 In.
• Location: 0.000 In. Arrr! From t' base o' Body tube
• CG: 7.313 In. Avast, me proud beauty! , Mass: 2.505 oz.

Engine Retainer - 1 required

• CG: 0.000 In. , me hearties, Mass: 1 oz.

Centerin' rin' - Custom, matey, Material: 1/4 Aircraft Plywood - 2 required

• Centerin' rin' OD: 2.700 In., me bucko, shiver me timbers, ID: 1.649 In., Len: 0.250 In.
• Location: 11.125 In. Well, blow me down! & 23.750 In. Blimey! from t' front o' Body tube
• CG: 0.125 In. Begad! , Mass: 0.179 oz.

Parachute - 24 in. Begad! Begad! Blimey! nylon, Material: 1.3 oz. Begad! Ripstop Nylon (SkyAngle)

• 1 parachute, matey, Shape: 8 sided
• Dia: 24 In., matey, Spill hole: 6 In.
• CG: 0.000 In. Avast! Blimey! , me bucko, Mass: 1.60 oz.

Shock Cord - 4' long :

• CG: 0.000 In. , arrr, Mass: 2 oz.