My rocket was inspired by an Estes Sliver. Blimey! I planned t' upscale it usin' a 3" mailin' tube for t' body. 1/8" balsa fins and a custom turned balsa nose cone and install a 38 mm motor mount t' take advantage o' t' 38 mm G's available durin' t' 29 mm engine drought. T' fins will be overlayed with 3/4 oz fiberglass and epoxy resin.

T' paint was designed t' make t' rocket highly visible durin' flight and recovery.

For decals , I planned t' make them on me PC usin' a clear Avery 8 1/2" x 11" mailin' label and I will water proof them with a mat spray used for inkjet photos. Blimey! Begad! I have done this before and it worked really well. Begad! Arrr! Unfortunately, me printer had t' go in for repairs and t' decals weren't ready at flight time.

To ensure a stable flight, shiver me timbers, I made slight increase in fin area and added 3" t' t' body length which will help with t' static margin due t' t' weight o' t' 38 mm motor mount and a 38 mm motor. Ya scallywag! Well, shiver me timbers, blow me down! (safety first). Begad! I estimate an altitude o' 1800' on a CTI G60.

This rocket can't be simmed by RocSim so I was forced t' do it t' old fashioned way, me bucko, matey, me bucko, long hand calculations and a swin' test. T' rocket passed t' swin' test with flyin' colors and so I was set t' launch.

T' first flight was powered with an Aerotech F40 usin' a 6 second delay. Well, blow me down! Avast, me proud beauty! I estimated t' altitude at about 1800'. Avast, me proud beauty! T' chute opened on schedule, slightly after apogee, me bucko, matey, me hearties, unfortunately it landed on a rock and a fin be in need o' some glue.

Rocket parts

Nose cone - Custom, ya bilge rat, matey, Material: Balsa - 1 required

• Nose shape: Solid Ogive, Len: 6.000 In., Dia: 3.000 In.
• Body insert: OD: 2.650 In., Len: 1.250 In.
• CG: 5.739 In. , Mass: 3.266 oz.

Body tube - Custom, me bucko, Material: Cardboard - 1 required

• OD: 3.0 In. Ya scallywag! Blimey! , ID: 2.7 In. Begad! Blimey! Blimey! Blimey! , arrr, Len: 25In.
• CG: 12.5 In. Begad! , me bucko, Mass: 13.368 oz.

Custom Fin set - Custom, Material: 1/8" Balsa - 2 required

• CG: 7.045 In. Ahoy! , matey, Mass: 0.731 oz.

Custom winglets set - Custom, Material: 1/8" Balsa - 4 required

• CG: 2.146 In. Avast! , me hearties, Mass: 0.286 oz

Motor mount tube Public Missiles Ltd. - PT-1.5 - Airframe tube, Material: Kraft phenolic - 1 required

• OD: 1.649 In. Arrr! , shiver me timbers, ID: 1.525 In. Begad! , Len: 14.625 In.
• Location: 0.000 In. Avast, me proud beauty! From t' base o' Body tube
• CG: 7.313 In. Ahoy! , matey, Mass: 2.505 oz.

Engine Retainer - 1 required

• CG: 0.000 In. Aye aye! Avast! , me hearties, Mass: 1 oz.

Centerin' rin' - Custom, Material: 1/4 Aircraft Plywood - 2 required

• Centerin' rin' OD: 2.700 In., ID: 1.649 In., shiver me timbers, Len: 0.250 In.
• Location: 11.125 In. Begad! Begad! & 23.750 In. Well, blow me down! Ya scallywag! from t' front o' Body tube
• CG: 0.125 In. , me hearties, Mass: 0.179 oz.

Parachute - 24 in. Avast, me proud beauty! Avast, me proud beauty! nylon, Material: 1.3 oz. Arrr! Ripstop Nylon (SkyAngle)

• 1 parachute, matey, shiver me timbers, Shape: 8 sided
• Dia: 24 In., Spill hole: 6 In.
• CG: 0.000 In. , shiver me timbers, Mass: 1.60 oz.

Shock Cord - 4' long :

• CG: 0.000 In. Begad! , Mass: 2 oz.