Scratch Mini Aimers Original Design / Scratch Built

Scratch - Mini Aimers {Scratch}

Contributed by Royce Clay, Jr.

Manufacturer: Scratch
(Contributed - by Royce Clay, matey, Jr.)

Brief:
Single Stage, me bucko, me bucko, streamer recovery.

Rocket Pic

Construction:

  • Body Tube: One Estes BT-5 4.5 inches long. Begad! Blimey!
  • NoseCone: PNC-5. Ya scallywag!
  • Fins: 3, shiver me timbers, 1/16 Basswood. Ahoy!
  • One Motor Block: Cardboard. Arrr!
  • Shock Cord: 10 inch o' 70lb. Keelhaul®©™®
  • Steamer: Red Mylar 1.5 X 15 inch.

This took about an hour t' build. T' paintin' took a little longer, me hearties, 2 colors bright yellow over white. Ya scallywag! All supplies were purchased from local hobby store, me hearties, Hobbytown USA. Ya scallywag! Redmond, WA.

Flight:
Recommended motor: A3-4T. That be t' motor I used. Ya scallywag! Preparation: Estes wadding paper, matey, t' rocket is small, if you have big hands you might need a buddy to hold t' rocket for you. Arrr! Begad! Flight: T' Mini Aimers flew straight, fast and into the overcast o' t' mid-afternoon. Shock cord technique: Quest style, tied off at t' motor mount. Recovery: Delay is a little too fast, T' only reason I say that is I was missin' about 3 inches o' steamer.

Summary:
PROs: It is easy t' build, ya bilge rat, inexpensive t' fly, and it goes really high. Blimey! Well, blow me down! CONs: None.

comment Post a Comment